E-Z Bean Tepee on the cheap.

Worth1 · February 4, 2016

I said I was going to drill hols in a block of wood and do this but by putting it off I had a better idea.
The idea struck me about 30 minutes ago and I had to do it.
Just so happens I had some scraps left over from an other project.

Here is what I did.
I cut a 2x4 3 1/2 inches long because this is how wide they are.
I then rolled my saw blade over to 30 degrees and cut that angle on all 4 sides.
I did this in the gap between the fence and the blade, but I set my saw up so I didn't cut right up to the top edge.
What you will need is 4 of those 1x1 or what ever they are sticks of lumber you get at home depot or Lowes and a 2X4.
8 screws long enough to go through the legs and into the 2X4. 2 for each leg.
1-1/2 inches will work fine.
The top screw is put in first in the middle and then the bottom screw is put in at a 30 degree angle so it wont go through the bottom of the 2X4.
You need to pre-drill your hole so you dont split out the wood.
It is a littl clumsy to put together by yourself but it can be done as I did it.
This thing is so light weight anyone can pick it up and move it.
If you dont have a table saw or know someone that does you can go to a cabinet shop and they will cut out a slew of them for you at not much cost.
I will post a pictuer with my phone as soon as I post this thread.
This is so cheap and so easy I cant believe it.

What you will have when you are done is a Tepee that is about 6 feet wide all around the bottom and about 7 feet tall.

Worth

Worth1 · February 4, 2016

Here are the pictures.
Now all you have to do is get some stakes to secure it to the ground and some string or what ever for netting and the beans to climb on.

Worth
IMG_20160204_39385.jpg

IMG_20160204_49712.jpg

BigVanVader · February 4, 2016

Nice, I'd leave one side open so you could just walk in and pick all your beans in the shade.

Worth1 · February 4, 2016

Quote:

Originally Posted by BigVanVader

Nice, I'd leave one side open so you could just walk in and pick all your beans in the shade.

I was going to leave an opening of sorts and place each side to the points of the compass.
This way the opening would be on the north side.

Worth

Worth1 · February 4, 2016

My next one will be made with a 2X6 or 8 and I will make a cucumber octagon/octopus with 8 legs.

Worth.

ginger2778 · February 4, 2016

Worth, I LOVE THIS! My husband is now officially mad at you

"Oh honey-I have just found your next project." Muahahaha.

OK he now wants to know, How do you store these if you make 20?

ginger2778 · February 4, 2016

So now we need a collapsible design. OK, thinking caps on.

Worth1 · February 4, 2016

Quote:

Originally Posted by ginger2778

So now we need a collapsible design. OK, thinking caps on.

Already done and was waiting to see if there was any interest.
What they have at the store are wood studs that have wood threads on one end and machine threads on the other.
They come in all sizes.
Screw these studs into the wood blocks and fasten the legs with wing nuts and washers.
You will simply have to drill your pilot holes all the way through the leg and the block at the same time this way everything will line up.
This way you can take it down and put it away at the end of the season.
If you are doing this by hand it will do you well to number and letter the legs and wood block so they go back to the same spot every year.
Lets say Tepee a leg one.
The block would have a big A on it and 1234 on each side.
The leg would have A 1 though 4 on each leg.
Now both of the studs will have to be parallel as close as you can get so they will slide on and off.
https://www.google.com/aclk?sa=l&ai=...5H-Hardware%7C

Worth

Worth1 · February 4, 2016

They also have threaded wood inserts and you could use small bolts.
I could set up jigs and make this stuff all day long and sell them.

I could get fancy and cut a dado out for each leg to fit in.

You can also just take the screws out but I like the stud or insert idea better.

Worth

BigVanVader · February 4, 2016

Wingnuts are a option for easy storage and reassembly.

Hellmanns · February 4, 2016

Or hinges..

Worth1 · February 4, 2016

Quote:

Originally Posted by Hellmanns

Or hinges..

Hinges are another idea but I was fresh out.

That is how I did my A Frame for running terraces.

Worth1 · February 4, 2016

A small Tee hinge would work fantastic.

Worth
http://www.stanleyhardware.com/type/...strap-t-hinges

Hellmanns · February 4, 2016

Quote:

Originally Posted by Worth1

A small Tee hinge would work fantastic.

Worth
http://www.stanleyhardware.com/type/...strap-t-hinges

Worth1 · February 4, 2016

Quote:

Originally Posted by Hellmanns

Thanks.

I now have the thing staked and tied to the ground and am going back out to make the bean net before sundown.
I just happen to have several thousand feet of bailing twine on hand.

Worth

February 4, 2016	#1
Worth1 Tomatovillian™ Join Date: Feb 2006 Location: Den of Drunken Fools Posts: 38,539	E-Z Bean Tepee on the cheap. I said I was going to drill hols in a block of wood and do this but by putting it off I had a better idea. The idea struck me about 30 minutes ago and I had to do it. Just so happens I had some scraps left over from an other project. Here is what I did. I cut a 2x4 3 1/2 inches long because this is how wide they are. I then rolled my saw blade over to 30 degrees and cut that angle on all 4 sides. I did this in the gap between the fence and the blade, but I set my saw up so I didn't cut right up to the top edge. What you will need is 4 of those 1x1 or what ever they are sticks of lumber you get at home depot or Lowes and a 2X4. 8 screws long enough to go through the legs and into the 2X4. 2 for each leg. 1-1/2 inches will work fine. The top screw is put in first in the middle and then the bottom screw is put in at a 30 degree angle so it wont go through the bottom of the 2X4. You need to pre-drill your hole so you dont split out the wood. It is a littl clumsy to put together by yourself but it can be done as I did it. This thing is so light weight anyone can pick it up and move it. If you dont have a table saw or know someone that does you can go to a cabinet shop and they will cut out a slew of them for you at not much cost. I will post a pictuer with my phone as soon as I post this thread. This is so cheap and so easy I cant believe it. What you will have when you are done is a Tepee that is about 6 feet wide all around the bottom and about 7 feet tall. Worth

February 4, 2016	#2
Worth1 Tomatovillian™ Join Date: Feb 2006 Location: Den of Drunken Fools Posts: 38,539	Here are the pictures. Now all you have to do is get some stakes to secure it to the ground and some string or what ever for netting and the beans to climb on. Worth IMG_20160204_39385.jpg IMG_20160204_49712.jpg Last edited by Worth1; February 4, 2016 at 03:19 PM.

February 4, 2016	#9
Worth1 Tomatovillian™ Join Date: Feb 2006 Location: Den of Drunken Fools Posts: 38,539	They also have threaded wood inserts and you could use small bolts. I could set up jigs and make this stuff all day long and sell them. I could get fancy and cut a dado out for each leg to fit in. You can also just take the screws out but I like the stud or insert idea better. Worth Last edited by Worth1; February 4, 2016 at 04:25 PM.

February 4, 2016	#3
BigVanVader Tomatovillian™ Join Date: Mar 2014 Location: Greenville, South Carolina Posts: 3,099	Nice, I'd leave one side open so you could just walk in and pick all your beans in the shade.

February 4, 2016	#6
ginger2778 Tomatovillian™ Join Date: Aug 2011 Location: Plantation, Florida zone 10 Posts: 9,283	Worth, I LOVE THIS! My husband is now officially mad at you "Oh honey-I have just found your next project." Muahahaha. OK he now wants to know, How do you store these if you make 20?

February 4, 2016	#11
Hellmanns Tomatovillian™ Join Date: Jul 2014 Location: kentucky Posts: 1,116	Or hinges..

February 4, 2016	#13
Worth1 Tomatovillian™ Join Date: Feb 2006 Location: Den of Drunken Fools Posts: 38,539	A small Tee hinge would work fantastic. Worth http://www.stanleyhardware.com/type/...strap-t-hinges