Tomatoville® Gardening Forums


Notices

Information and discussion about canning and dehydrating tomatoes and other garden vegetables and fruits. DISCLAIMER: SOME RECIPES MAY NOT COMPLY WITH CURRENT FOOD SAFETY GUIDELINES - FOLLOW AT YOUR OWN RISK

Reply
 
Thread Tools Display Modes
Old February 22, 2017   #1
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default Operation Old Pressure Cooker.

Last Sunday I bought an old National 25 quart pressure cooker.
More than likely close to 100 years old.
I wasn't going to start a thread on it's restoration but I decided to anyway, some of you might get a kick out of it.
I am in the process of polishing the top.
It is the one on the left.
Worth
IMG_20170219_4070.jpg

IMG_20170222_49314.jpg
Worth1 is offline   Reply With Quote
Old February 22, 2017   #2
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Here is the proud old name made right here in the USA.
Worth
IMG_20170222_28343.jpg
Worth1 is offline   Reply With Quote
Old February 26, 2017   #3
Jimbotomateo
Tomatovillian™
 
Join Date: Jun 2016
Location: Santa Maria California
Posts: 1,014
Default

Quote:
Originally Posted by Worth1 View Post
Here is the proud old name made right here in the USA.
Worth
Attachment 70066
Worth, it makes me so happy to see you bringing back all of the " old school" devices and methods. Cool to see all the stuff we grew up with and brings back such good memories. jimbo
Jimbotomateo is offline   Reply With Quote
Old February 26, 2017   #4
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Quote:
Originally Posted by Jimbotomateo View Post
Worth, it makes me so happy to see you bringing back all of the " old school" devices and methods. Cool to see all the stuff we grew up with and brings back such good memories. jimbo
Your welcome.
Sadly it is a long gone practice for much of this stuff I do.
It makes me feel like a dinosaur.

I remember seeing the old galvanized oval water bath canners at people houses in the barn.
And I remember some people still canning green beans this way.
Worth
Worth1 is offline   Reply With Quote
Old February 22, 2017   #5
AlittleSalt
BANNED FOR LIFE
 
AlittleSalt's Avatar
 
Join Date: May 2014
Posts: 13,333
Default

That one is BIG. It looks like it is cleaning up well.
AlittleSalt is offline   Reply With Quote
Old February 22, 2017   #6
wildcat62
Tomatovillian™
 
wildcat62's Avatar
 
Join Date: May 2014
Location: Zone 6 Northern Kentucky
Posts: 1,094
Default

Looking good. I wondered how you were going to clean it up.
wildcat62 is offline   Reply With Quote
Old February 22, 2017   #7
whistech
Tomatovillian™
 
Join Date: Aug 2012
Location: Between The Woodlands and Spring, Texas
Posts: 553
Default

Looks great Worth, I have an old National Pressure canner that looks like yours but I think it may be a smaller size and I'll look tomorrow to see. It was my Grandmothers canner and I remember my Mother canning with it when I was growing up.
__________________
Arlie
whistech is offline   Reply With Quote
Old February 22, 2017   #8
PhilaGardener
Tomatovillian™
 
PhilaGardener's Avatar
 
Join Date: Jan 2014
Location: Near Philadelphia, PA
Posts: 1,940
Default

Good old solid metal there! Great find!
PhilaGardener is offline   Reply With Quote
Old February 23, 2017   #9
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

I looked and found information on wiki about national canners.
According to them or who ever it was that contributed to wiki they started in 1917.
Then went on to become National Presto now just Presto.
I decided to start this thread not only to show off my old canners but to discuss the use of these and what we have today.

The old ones like mine you have to darn near drive the things.
But they are what I was raised up with.
One was an old Kook KwicK with the band around it and the other was an old All American that is different than the ones they have today.
Both were huge, both were ran at the same time on the stove.
I remember where my mother picked up the old KooK KwicK it was in Mt Grove Missouri at the once a month rummage sale they had in town.
I think she paid something like $5 or $10 for it, this was back in the 60's.

I have no idea what my sister was up to but it didn't have a darn thing to do with canning preserving or cooking of any kind.
She was more or less the maid.
It was my job to take care of the critters and the kitchen stuff.
I can still see my little 5 foot 2 inch French mother lifting this huge canners around the kitchen with a home rolled cigarette in her lips.
Once the jars were cooled it was my job to haul them down to the basement and put them away on the shelves.
I was a wee thing at the time and had to be vary careful not to drop any and break them.

Sadly I have came to the realization not many of us are left around that know how to operated these old canners.
They are very safe today and have a redundant system to let pressure off.
The weight and the over pressure pop out plug.
Mine just has the adjustable pressure release valve and the other valve that can be closed all of the way or adjusted to let steam off at any given rate.
The adjustable safety release valve should NOT be able to hold any more than about 20 PSI or maybe around 21, 22 NO MORE and then it should go off.
I have mine set for just a little over 12 PSI when I use it plus I never get involved in anything else.
These old canners can hold one heck of a lot more pressure but I dont want to rupture one just to see how much.

What do I like about the old ones over the new ones?
That pop off release valve, when it goes it can be closed when the pressure goes down.
That darn plug is out and you will have a geyser (Old Faithful) on your hands.
This will happen if the steam vent is plugged on your weighted canner and you aren't looking at the gauge.
None of this is of concern as long as you follow the rules and instructions.

Now back to the restoration.
I am using wet dry sand paper with oil/kerosene and carburetor choke cleaner to get the old grease and such off.
It is quite the job.
No way will it look completely new.

Worth
Worth1 is offline   Reply With Quote
Old February 23, 2017   #10
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Next I have tested the old pop off valve and it goes at 21 PSI the old gauge is fine too and is of the type that can be calibrated, no need for a new gauge.

Here is where I just about bet the old pressure cooker was bought.
It was bought I bet in McKinney Texas at a hardware store called JP DOWELL.
The people I bought it from said they were from the Dallas area McKinney is just north of Dallas.
Here is an old ghost sign on a building in McKinney.
It served the area from 1877 on up into the 20th century.
Here is a link to the information.
https://www.google.com/url?sa=t&rct=...v1G_PK5n_Vm1Ng
Here is the ghost sign.
JP DOWELL.jpg
Coming next is the reason for my conclusion.

Worth
Worth1 is offline   Reply With Quote
Old February 23, 2017   #11
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

At some time in the canners life the gauge was changed I bet the gauge was purchased where the canner was originally purchased maybe.
Here is the gauge from the canner.
Worth
IMG_20170223_17439.jpg
Worth1 is offline   Reply With Quote
Old February 23, 2017   #12
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Before going any farther I decided to put it through some safety and performance trials.
Got two gallons of water in it and checking for leaks.
In my opinion doing this while it is hot is better than doing it cold with an air compressor.
So far so good bringing the pressure up a little at a time.
Worth

IMG_20170223_33630.jpg
Worth1 is offline   Reply With Quote
Old February 23, 2017   #13
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

She got all the way up to about eighteen pounds before she let off steam with the pressure release all the way down.
The pressure dropped before I could take the picture.
Works for me.
I will continue to let it cycle a few times and turn it off.
Very happy with the performance of the old gal.
No leaks what so ever.

Worth
IMG_20170223_39101.jpg

IMG_20170223_51483.jpg
Worth1 is offline   Reply With Quote
Old February 23, 2017   #14
Worth1
Tomatovillian™
 
Worth1's Avatar
 
Join Date: Feb 2006
Location: Den of Drunken Fools
Posts: 38,539
Default

Here she is bathing in the sun.
I cleaned up the rest of her inside and out even the bottom.
The rest is just odds and ends that need to be done on the handles and so on.
I washed her good with detergent and then rinsed.
The next time you see her she will be at work cooking and canning.
One last thing I did was go over the canner with a scotch brite pad to get rid of that ridiculous mirror shine.
Worth

IMG_20170223_4316.jpg
Worth1 is offline   Reply With Quote
Old February 23, 2017   #15
PhilaGardener
Tomatovillian™
 
PhilaGardener's Avatar
 
Join Date: Jan 2014
Location: Near Philadelphia, PA
Posts: 1,940
Default

Good show, Worth! That canner will outlast all of us, particularly with a little care.

Folks just don't know how to deal with mechanical things anymore. If there isn't a app for it, they better not run it!
PhilaGardener is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:18 AM.


★ Tomatoville® is a registered trademark of Commerce Holdings, LLC ★ All Content ©2022 Commerce Holdings, LLC ★