Member discussion regarding the methods, varieties and merits of growing tomatoes.
|
|
Thread Tools | Display Modes |
|
June 1, 2020 | #1 |
Tomatovillian™
Join Date: Aug 2012
Location: Suburban Washington, DC (Zone 7A)
Posts: 347
|
Watering solutions?
Hi all,
This year I've got about 16 tomato plants going in three rows, and I'm looking for some watering solutions. A drip or soaker hose along the rows seems attractive. Show me your setups! I'm considering purchasing something like this: https://www.gardeners.com/buy/snip-n...submit&start=1 Thoughts? Anybody actually use this? Last edited by KathyDC; June 1, 2020 at 04:18 PM. |
June 1, 2020 | #2 |
Tomatovillian™
Join Date: May 2006
Location: Glendora, CA
Posts: 167
|
Drip irrigation
I can't show you my setup because it's covered in mulch.
That said I use a timer connected to a spigot in my veggie patch. It uses a half inch feeder hose with branches of one-quarter inch tubing which connect to adjustable micro sprinklers. I tried the button drippers, but found the adjustable micro sprinklers to be better. I tried soaker hose, but like my current setup better. I got it all at Home Depot and the manufacturer is called DIG. They have an online guide for their systems here: https://www.digcorp.com/uploads/down...-Guide_web.pdf
__________________
"We have met the enemy and he is us" - Pogo |
June 1, 2020 | #3 |
Tomatovillian™
Join Date: Aug 2012
Location: Suburban Washington, DC (Zone 7A)
Posts: 347
|
Wow, thanks! This looks maybe a little over my head, though. I'll have to take a closer look.
|
June 1, 2020 | #4 |
Tomatovillian™
Join Date: Dec 2017
Location: Detroit
Posts: 688
|
I know people have used the Blumat drip system, but I can't personally vouch for it... my watering system is a 5-gallon bucket.
|
June 1, 2020 | #5 |
Tomatovillian™
Join Date: Jan 2018
Location: Philly 7A
Posts: 739
|
I use drip Depot.
I run a main line with a low center point for winterizing. From the main line I run emitter tubing to each bed. Each bed has a shut off valve. The emitter tubing is spaced at 12" with ½ gph emitters The reason I don't use individual emitters in the bed is because my planting changes every year. I also have quite a few pots and a hanging basket on this system. The larger air pots and regular pots are fed with a circle of emitter tubing, some have 3 emitters per tubing, others have 2 emitters per tubing, based on the pot size. A few smaller pots and hanging basket have 1 adjustable emitter. Every pot has it's own valve to turn on our shut off, same as the beds. I use a pressure reducer from the hose bib. Them a hose goes to a timer, from the timer is a backflow valve followed by an inline filter then to the main line. Hope this helps. |
June 1, 2020 | #6 |
Tomatovillian™
Join Date: Jan 2018
Location: Philly 7A
Posts: 739
|
I'll try to find some pics
|
June 2, 2020 | #7 |
Tomatovillian™
Join Date: Nov 2011
Location: MA/NH Border
Posts: 4,919
|
Another thumbs up for Drip Depot. They have lots of great videos on their site to help de-mystify drip irrigation, and pre-assembled kits for different applications. My two 4'x24' beds have three runs of drip tubing running from end to end, and we paid the irrigation company to run a supply line out to the garden and set it up as a zone on our lawn irrigation system. We use a WiFi controller (Rachio) to run both the lawn and garden zones.
I also have a separate section of container plants that I set up with drip using micro sprayers running off a hose connection with a battery operated timer. This I put together and installed myself with help from the Drip Depot videos. |
June 2, 2020 | #8 |
Tomatovillian™
Join Date: May 2006
Location: Glendora, CA
Posts: 167
|
DIG again
The DIG system booklet shows a lot more than what you need. Think of it this way. It's just a large hose to which you connect a smaller hose to which you attach a micro sprinkler.
Here's a link to a bunch of videos for DIG https://www.digcorp.com/drip-and-irrigation-videos All the dripper systems are pretty much the same. I do like the DIG system because I can just run to Home Depot for parts/improvements.
__________________
"We have met the enemy and he is us" - Pogo Last edited by QAGuy; June 2, 2020 at 12:31 AM. |
June 7, 2020 | #9 | |
Tomatovillian™
Join Date: Oct 2012
Location: Orlando, FL
Posts: 614
|
Quote:
|
|
June 2, 2020 | #10 |
Tomatovillian™
Join Date: Jun 2010
Location: Romania/Germany , z 4-6
Posts: 1,582
|
If you have more sandy soil, I definitely recommend the ones with a porous hose at the end, instead of the dripper, like in your link OP, otherwise the water distribution will be quite poor. From what I've seen they are not as durable as some good drippers, however, especially if you leave them over a cold winter.
|
June 2, 2020 | #11 | |
Tomatovillian™
Join Date: Aug 2012
Location: Suburban Washington, DC (Zone 7A)
Posts: 347
|
Quote:
Anyway, rant over! But no, I have clay soil. I could probably do with a little sand. |
|
June 3, 2020 | #12 |
Tomatovillian™
Join Date: Dec 2008
Location: Reading, Pennsylvania
Posts: 48
|
I have heavy clay here too that is mixed with rock. I mixed in some compost and peat humus (not moss) into the soil. It made a world of difference in the structure and drainage. After that I mulched with compost in the Spring and chopped leaves in the fall. It went from being a brick when it was dry outside, to being able to dig it with just a small hand trowel or my bare hands.
|
June 2, 2020 | #13 |
Tomatovillian™
Join Date: May 2006
Location: Glendora, CA
Posts: 167
|
Your water supply can greatly affect the soaker hoses. If you have 'hard' water, lots of calcium chloride, they can get clogged up with that stuff. Had soaker hoses and my hard water clogged them up in a year.
__________________
"We have met the enemy and he is us" - Pogo |
June 2, 2020 | #14 |
Tomatovillian™
Join Date: May 2007
Location: North County, San Diego
Posts: 419
|
I also use Drip Depot. My system is very basic. I come off the hose bib with a garden hose thread to 1/2 inch tubing adapter. Then run 1/2 inch tubing to the garden. Then 1/2 inch couple to 1/2 inch drip line with 0.5 GPH emitters spaced every 12 inches. Then an end cap. I don't use pressure regulators or filters. I regulate the pressure by making the runs long enough. The utility water supply is clean. I turn the water on and off manually.
|
June 2, 2020 | #15 |
Tomatovillian™
Join Date: Aug 2007
Location: Victoria. Australia
Posts: 543
|
I think a watering system for 16 plants is getting a bit flash, so this is what we use here (Oz) to put the water where it's needed - at the roots. I grow an average of 30 plants and water using a wand/breaker - so simple.
I use a 2" slotted aggie pipe as shown here, which gets placed when the seedling gets planted. About 3" is left above ground and watering is simplified. The plastic pipe is slotted all the way along the length, so water actually gets out along the length. Something to note here is, that when the plant is pulled, its roots are often found inside these pipes, so the plant seeks the water and it works. |
|
|